ShopReno

Tools

Hand tools, power-tool accessories, measuring and tile-installation tools.

Tools

6417 products
Filters

Filters

Category

Price

–

Brand

Tools buying guide

Buy tools for the jobs you actually do. For most renovations, start with a tape measure, level, utility knife, hammer, screwdrivers or a drill-driver, and a saw suited to the material. Pick one cordless battery platform so batteries are shared between tools. Use eye, ear and dust protection on every power-tool job.

Drill or impact driver?

A drill-driver has a clutch and chuck for drilling holes and setting screws with control. An impact driver delivers rotational blows for driving long screws and lags quickly, with less wrist strain, but it uses hex-shank bits. Many people own both. If you buy one first, the drill is more versatile.

Which saw do I need?

A circular saw handles straight cuts in lumber and sheet goods. A mitre saw makes accurate crosscuts and angles for trim and framing. A jigsaw cuts curves and openings. An oscillating multi-tool makes plunge cuts and flush cuts in tight spots. Choose the blade for the material, such as fine-tooth for trim and carbide or diamond for masonry.

What safety gear should I wear?

Wear safety glasses for every cutting, drilling or hammering job, hearing protection for saws and other loud tools, and a properly fitted respirator (N95 or better) for drywall sanding, cutting cement board and other fine dust. Silica dust from concrete and tile needs extra care. Add gloves and steel-toe boots on jobsites.

How do I choose a ladder?

Choose a ladder that lets you work without standing on the top two steps or rungs. For a stepladder, the highest safe reach is about 4 ft above the ladder's height. Check the duty rating: CSA Grade 1 or 1A (ANSI Type I or IA, about 250 to 300 lb) covers you plus the tools and materials you carry. Use fibreglass near electrical work.

Which tile installation tools do I need?

You need a notched trowel sized for the tile (larger tile needs a larger notch), a tile cutter or wet saw, spacers or a levelling system, a margin trowel and bucket for mixing, a grout float, and sponges. Large-format tile benefits from a levelling clip system to prevent lippage.

General guidance only: building codes and permits vary, so confirm requirements for your project with your municipality. Need quantities? Try our project calculators or ask us.